When your process requires robust removal of coarse particles—such as grit, resin beads, pulp, or pigment clusters—while maintaining high flow and easy handling, our Size #1, 600 Micron – Nylon Monofilament Mesh Liquid Filter Bag with Galvanized Steel Ring and Integrated Handle delivers unmatched reliability and convenience.
Table of Contents
1. Perfect Balance: 600 Micron Filtration Meets High Flow
-
Efficient Coarse Capture
At 600 µm, this filter bag intercepts large debris before it damages pumps, fouls fine filters, or impairs downstream processes. -
Maximum Throughput
The monofilament mesh boasts ~75 % open area, allowing up to 30 GPM per bag with minimal pressure drop—ideal for high‑volume applications. -
Staged Filtration
Use as your first‑stage filter ahead of 100 µm or 50 µm bags to extend the life of finer elements and reduce overall maintenance.
2. Rugged Construction for Industrial Demands
Nylon Monofilament Mesh Media
-
Uniform 600 µm Pores: Precision‑woven single‑filament mesh ensures consistent particle retention without channeling.
-
High Tensile Strength: Resists tearing and deformation even under pulsating pressures up to 75 psi.
-
Chemical & Thermal Resilience: Withstands temperatures up to 300 °F and is compatible with water, mild acids, alkalis, and oils.
Galvanized Steel Ring
-
Corrosion‑Resistant Coating: Zinc plating protects against rust, extending service life in wet or humid environments.
-
Precise Fit: 7.06″ outer diameter, 0.125″ flange thickness—seats securely in any standard Size #1 housing.
-
Integrated Handle: Heavy‑duty wire bail allows swift change‑outs without tools and prevents slipping during removal.
3. Ideal Applications
-
Water Intake & Pre‑Filtration: Remove leaves, silt, and sand from wells or surface water before fine treatment.
-
Process Water & Cooling Circuits: Trap bulk solids in recirculating loops to safeguard pumps and heat exchangers.
-
Paints, Coatings & Inks: Eliminate pigment clumps and gelled particles for smooth finishes and uninterrupted spraying.
-
Food & Beverage Pre‑Straining: Clarify fruit juices, syrups, and broths before fine filtration or packaging.
-
Industrial Slurries & Resin Recovery: Capture large particulates in chemical or resin processes to prevent downstream blockages.
-
Aquaculture & Aquarium Filtration: Remove feed and waste solids to maintain water clarity and aquatic health.
4. Performance Specifications
| Specification | Detail |
|---|---|
| Micron Rating | Nominal 600 µm |
| Mesh Material | Nylon Monofilament |
| Open Area | ~75 % |
| Bag Size | Size #1 (7.06″ × 16.5″) |
| Ring Material | Galvanized Steel (zinc plated) |
| Handle | Heavy‑duty galvanized steel bail |
| Max Pressure | 75 psi |
| Max Temperature | 300 °F (149 °C) |
| Chemical Compatibility | Water, mild acids/alkalis, oils |
| Seam Type | Ultrasonic welded (no stitching) |
| Dirt‑Holding Capacity | ~4.5 L mesh volume |
| Typical Flow Rate | Up to ~30 GPM @ 10 psi drop per bag |
5. Easy Installation & Maintenance
-
Seat the Ring: Place the galvanized steel flange flush on the housing ledge—no tools needed.
-
Support the Bag: Always use a #1 support basket to prevent mesh collapse under pressure.
-
Monitor ΔP: Install upstream/downstream pressure gauges; change the bag at a 10–12 psi differential.
-
Clean or Swap: Rinse nylon mesh with low‑pressure water; allow to dry fully before reuse. For heavy loads, replace with a fresh bag.
-
Handle‑Assisted Removal: Use the integrated bail to lift the bag cleanly, minimizing spills.
6. How to Select & Order
-
Confirm Housing Size: Fits any standard Size #1 vessel (ID 7″, length 16.5″).
-
Evaluate Solids Profile: Ideal when most particulates exceed 600 µm.
-
Choose Quantity: Available in packs of 25 or 50, with scalable bulk pricing.
-
Customization: Ask about FDA‑grade mesh, reinforced seams, or alternative handle styles.
-
Sample First: Validate performance with one or two sample bags before placing large orders.
7. Why Partner with Us?
-
Fast Fulfillment: Ample inventory for prompt shipment.
-
Expert Support: Filtration specialists guide you to the optimal solution.
-
Certified Quality: ISO 9001 manufacturing and full material traceability.
-
Competitive Pricing: Volume discounts and loyalty programs.
-
Tailored Solutions: Custom fabrication to meet unique process requirements.
Get Started Today
Discover the reliability and efficiency of our Size #1, 600 Micron – Nylon Monofilament Mesh Filter Bag with Galvanized Steel Ring and Handle. Contact us to request samples, discuss your application, or place an order—and experience hassle‑free coarse filtration that protects your equipment and streamlines your operations.
